Shopee
เซ็นเซอร์วัดความชื้นในดิน Soil Humidity Detection Sensor V2 สายยาว 1.3เมตร 5เมตร
5.0
ขายแล้ว 4 ชิ้น
0 ครั้ง
฿120
GusTron
แบรนด์:
NoBrand
ซื้อที่ Shopee
คุณจะถูกนำไปยัง Shopee
รายละเอียดสินค้า
เซ็นเซอร์วัดความชื้นในดิน Soil Humidity Detection Sensor V2 สายยาว 1.3เมตร 5เมตร
สามารถใช้วัดความชื่นในดินหัว sensor สามารถกันน้ำได้ทนกรดของปุ๋ยและกรดในดินได้นิยมนำมาทำระบบดูแลต้นไม้ ใน smart farmer
Description:
NO. NO. Value
1 Name Soil humidity sensor
2 Size 36157mm
3 Voltage DC 3.3-12V
4 Current <20mA;
5 Interface + - DO AO; DO digital value; AO analog value
6 Operating Temperature -25~85 Celsius
Application:
It is used for detecting soil humidity.
Principle:
The soil humidity probe is for detecting humidity, and the voltage comparator is for judging the humidity amount. When the humidity is larger than set value, DO will output to the low level.
Using Introduction:
"+" connects power positive; "-" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, "P" power indicator lamp will be on and the module will operate normally
Clockwise/counter clockwise adjusts the blue potentiometer, and it can improve/reduce the detection sensitivity. Take the "Thermal Sensor" as an example: if it defaults to a 25 Celsius trigger, then the DO output low level is valid. After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger. If you are counter clockwise adjusting, then higher than 25 Celsius can trigger.
When clockwise adjusts the potentiometer so the "S" output indicator is on, it shows that the adjusting range has surpassed the testing threshold. If counter clockwise adjusting is extended to the max, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally. Potentiometer adjustment is only used for the DO port, and has no relevance to AO output
4.AO output is analog value (voltage), and it can detect via MCU AD port
❤️❤️❤️❤️รับประกันสินค้า 100%❤️❤️❤️❤️
- ภายใน 14 วัน (นับจากวันที่ลูกค้าได้รับสินค้า)
- เปลี่ยนฟรีทันที !!!! (กรณีสินค้าเกิดความเสียหายจากโรงงานของผู้ผลิตเท่านั้น)
เงื่อนไข: 1. ไม่มีรอยไหม้จากการใช้งานผิดวิธี หรือ ร่องรอยการใช้งานผิดประเภทที่ทำให้สินค้าเสียหาย
2. มีเลข Serial รหัสสินค้า จากโรงงานของทางร้านอยู่บนผลิตภัณฑ์(ข้อนี้ถ้าซื้อกับทางร้านจะมีทุกตัวลูกค้าไม่ต้องกังวลนะครับ)
🙏🙏🙏🙏 บริการให้คำแนะนำปรึกษา ฟรี !!!! 🙏🙏🙏🙏
************ ระบบ Shopee ปรับใหม่เป็นการสุ่มขนส่งระหว่าง Kerry กับ Shopee ************
- โอกาสได้ Kerry สูงกว่า
- ทางร้านตัดรอบ 13.00 น. สั่งก่อน 13.00 น. ส่งภายในวัน หลังจากนั้นจัดส่งวันถึดไป
- สินค้าจัดส่งทุกวันจันทร์ ถึง เสาร์ หยุดวันอาทิตย์
สามารถใช้วัดความชื่นในดินหัว sensor สามารถกันน้ำได้ทนกรดของปุ๋ยและกรดในดินได้นิยมนำมาทำระบบดูแลต้นไม้ ใน smart farmer
Description:
NO. NO. Value
1 Name Soil humidity sensor
2 Size 36157mm
3 Voltage DC 3.3-12V
4 Current <20mA;
5 Interface + - DO AO; DO digital value; AO analog value
6 Operating Temperature -25~85 Celsius
Application:
It is used for detecting soil humidity.
Principle:
The soil humidity probe is for detecting humidity, and the voltage comparator is for judging the humidity amount. When the humidity is larger than set value, DO will output to the low level.
Using Introduction:
"+" connects power positive; "-" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, "P" power indicator lamp will be on and the module will operate normally
Clockwise/counter clockwise adjusts the blue potentiometer, and it can improve/reduce the detection sensitivity. Take the "Thermal Sensor" as an example: if it defaults to a 25 Celsius trigger, then the DO output low level is valid. After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger. If you are counter clockwise adjusting, then higher than 25 Celsius can trigger.
When clockwise adjusts the potentiometer so the "S" output indicator is on, it shows that the adjusting range has surpassed the testing threshold. If counter clockwise adjusting is extended to the max, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally. Potentiometer adjustment is only used for the DO port, and has no relevance to AO output
4.AO output is analog value (voltage), and it can detect via MCU AD port
❤️❤️❤️❤️รับประกันสินค้า 100%❤️❤️❤️❤️
- ภายใน 14 วัน (นับจากวันที่ลูกค้าได้รับสินค้า)
- เปลี่ยนฟรีทันที !!!! (กรณีสินค้าเกิดความเสียหายจากโรงงานของผู้ผลิตเท่านั้น)
เงื่อนไข: 1. ไม่มีรอยไหม้จากการใช้งานผิดวิธี หรือ ร่องรอยการใช้งานผิดประเภทที่ทำให้สินค้าเสียหาย
2. มีเลข Serial รหัสสินค้า จากโรงงานของทางร้านอยู่บนผลิตภัณฑ์(ข้อนี้ถ้าซื้อกับทางร้านจะมีทุกตัวลูกค้าไม่ต้องกังวลนะครับ)
🙏🙏🙏🙏 บริการให้คำแนะนำปรึกษา ฟรี !!!! 🙏🙏🙏🙏
************ ระบบ Shopee ปรับใหม่เป็นการสุ่มขนส่งระหว่าง Kerry กับ Shopee ************
- โอกาสได้ Kerry สูงกว่า
- ทางร้านตัดรอบ 13.00 น. สั่งก่อน 13.00 น. ส่งภายในวัน หลังจากนั้นจัดส่งวันถึดไป
- สินค้าจัดส่งทุกวันจันทร์ ถึง เสาร์ หยุดวันอาทิตย์