Shopee
กลอนแม่เหล็กควบคุมประตู 600 ปอนด์ พร้อม ขายึดกลอนแม่เหล็ก Magnetic Lock 600 Pound and LZ BREAKET SET 600 LBS
5.0
ขายแล้ว 31 ชิ้น
฿990
Rvada ตรวจสอบราคา
มีประวัติขาย 31 ชิ้น เรตติ้ง 4.96★
value shop
แบรนด์:
NoBrand
ซื้อที่ Shopee
คุณจะถูกนำไปยัง Shopee
ลิงก์นี้เป็นลิงก์พันธมิตร เราอาจได้รับค่าคอมมิชชั่นจากการสั่งซื้อ โดยราคาที่คุณจ่ายไม่เปลี่ยนแปลง
รายละเอียดสินค้า
รายละเอียดสินค้า กลอนแม่เหล็กควบคุมประตู 600 ปอนด์ พร้อม ขายึดกลอนแม่เหล็ก Magnetic Lock 600 Pound and LZ BREAKET SET 600 LBS
- ใช้งานกับประตูไม้, ประตูกระจกอลูมิเนียมขนาดธรรมดา และขนาดใหญ และ มีขายึดตัวกลอนแม่เหล็ก มาครบ พร้อมติดตั้งได้ทันที
- ใช้ไฟ 12 V หรือ 24 V ให้เปลี่ยน ตัว Jumper ในคู่มือมีบอก
- มีไฟ LED บอกล๊อกแน่นหรือไม่แน่น
A. 12 VDC Input Requierd power 0.5 Amp minimum
- connect the positive + Lead froma 12 VDC power source to V+ connect the ground - lead froma 12 VDC Power source to V- cHECK JUMPER FOR 12 VDC operation
B. 24 VDC Input
Require Power 0.25 Amp minimum
Connect the positive + lead from a 24 VDC power source to V+
Connect the ground - lead from 24 VDC power source to V+
Check jumper for 24 VDC operation
C. Contacts
Relay dry contacts are rated 1 Amp at 24 VDC for safe operation do not exceed this rating if you require a normally open switch connect the wires from the system to COM and NO If youre require a nomally close switch connect the wires from the systemto COM and NC
Importantl
If power switch is not wire between DC source voltage and magnet if will take a longer time to de - energize the magnet simulating residual magnetism
- ใช้งานกับประตูไม้, ประตูกระจกอลูมิเนียมขนาดธรรมดา และขนาดใหญ และ มีขายึดตัวกลอนแม่เหล็ก มาครบ พร้อมติดตั้งได้ทันที
- ใช้ไฟ 12 V หรือ 24 V ให้เปลี่ยน ตัว Jumper ในคู่มือมีบอก
- มีไฟ LED บอกล๊อกแน่นหรือไม่แน่น
A. 12 VDC Input Requierd power 0.5 Amp minimum
- connect the positive + Lead froma 12 VDC power source to V+ connect the ground - lead froma 12 VDC Power source to V- cHECK JUMPER FOR 12 VDC operation
B. 24 VDC Input
Require Power 0.25 Amp minimum
Connect the positive + lead from a 24 VDC power source to V+
Connect the ground - lead from 24 VDC power source to V+
Check jumper for 24 VDC operation
C. Contacts
Relay dry contacts are rated 1 Amp at 24 VDC for safe operation do not exceed this rating if you require a normally open switch connect the wires from the system to COM and NO If youre require a nomally close switch connect the wires from the systemto COM and NC
Importantl
If power switch is not wire between DC source voltage and magnet if will take a longer time to de - energize the magnet simulating residual magnetism