Shopee
TAMIYA SPRAY PAIINT TS1-TS100 100ml
5.0
ขายแล้ว 10 ชิ้น
฿240
Rvada ตรวจสอบราคา
ราคาถูกผิดปกติ (29% ของค่าเฉลี่ยหมวด) ควรตรวจสอบร้านค้าก่อนซื้อ
Winner Hobby Nont
แบรนด์:
Tamiya
ซื้อที่ Shopee
คุณจะถูกนำไปยัง Shopee
ลิงก์นี้เป็นลิงก์พันธมิตร เราอาจได้รับค่าคอมมิชชั่นจากการสั่งซื้อ โดยราคาที่คุณจ่ายไม่เปลี่ยนแปลง
รายละเอียดสินค้า
สีสเปรย์ทามิย่า
กระป๋องสีสเปรย์เหล่านี้มีประโยชน์อย่างมากสำหรับการทาสีพื้นผิวขนาดใหญ่ สีเป็นแล็กเกอร์สังเคราะห์ที่แห้งตัวได้ในระยะเวลาอันสั้น แต่ละกระป๋องบรรจุสีได้ 100 มล. ซึ่งเพียงพอสำหรับทาทับตัวรถขนาด 1/24 สองหรือสามตัวได้เต็มที่ สีสเปรย์ของ Tamiya ไม่ได้รับผลกระทบจากสีอะคริลิกหรือสีเคลือบ ดังนั้นหลังจากทาสีรองพื้นโดยรวมแล้ว คุณสามารถเพิ่มหรือเลือกรายละเอียดได้โดยใช้สีเคลือบฟันและ/หรือสีอะครีลิค ด้วยการรวมการใช้สีทั้งสามประเภทนี้เข้าด้วยกัน การตกแต่งแบบจำลองพลาสติกจึงง่ายขึ้นและมีประสิทธิภาพมากขึ้น
Tamiya Color Spray Paints
These cans of spray paint are extremely useful for painting large surfaces. The paint is synthetic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover two or three 1/24 scale sized car bodies. Tamiya spray paints are not affected by acrylic or enamel paints; therefore, following an overall base coat, details can be added or picked out using enamel and/or acrylic paints. By combining the use of these three types of paints, the finishing of plastic models becomes simpler and more effective.
TS-paints are for hard plastic :
These bodies are strong, often up to 3mm thick and are made usually from strong ABS plastic. This type of body is common on Scale realistic crawlers and in many older style Tamiya Nostalgia Kits. Hard Plastic bodies usually need some preparing work before the paint such as sanding or attaching some body parts. It is very highly recommended to use fine primer paint before the final spray! Pro-tip! Use high grade masking tape. Cheap brands may let your paint bleed through!
Tips for painting with spray paints:
Never paint in hurry! You are going to watch this paintwork many years so reserve time. Total process of fine paintwork is usually few days or more from start to finish! Take your time.
Never paint in too humid air, rain or too cold. Any of these will easily ruin your paintwork.
Wash the body with mild soap and let it dry overnight.
Make a painting plan. What paint and in what order? No I need to re-mask?
Prepare your body and the painting area. Use masking tape or liquid mask.
Check out everything. Did you mask everything that was supposed to?
You can put the cans in warm water (not hot!) to build up more pressure inside the can. Never exceed +35 Celcius degrees here!
Shake well. Like really well. Then shake some more.
Paint slow but steady and keep the can approx 20cm away from the body. Always start and finish the spray outside of the body. Use paint sparingly.
Let the paint dry few minutes between the layers. There is no hurry! Never try to make it "with one shot". Tamiya paints are fine and thin and if you spray too much before previous layer is dry, there will be runoffs.
If you make a mistake, stop! Do not try to fix wet paint! Let it dry, sand it out and continue again later.
กระป๋องสีสเปรย์เหล่านี้มีประโยชน์อย่างมากสำหรับการทาสีพื้นผิวขนาดใหญ่ สีเป็นแล็กเกอร์สังเคราะห์ที่แห้งตัวได้ในระยะเวลาอันสั้น แต่ละกระป๋องบรรจุสีได้ 100 มล. ซึ่งเพียงพอสำหรับทาทับตัวรถขนาด 1/24 สองหรือสามตัวได้เต็มที่ สีสเปรย์ของ Tamiya ไม่ได้รับผลกระทบจากสีอะคริลิกหรือสีเคลือบ ดังนั้นหลังจากทาสีรองพื้นโดยรวมแล้ว คุณสามารถเพิ่มหรือเลือกรายละเอียดได้โดยใช้สีเคลือบฟันและ/หรือสีอะครีลิค ด้วยการรวมการใช้สีทั้งสามประเภทนี้เข้าด้วยกัน การตกแต่งแบบจำลองพลาสติกจึงง่ายขึ้นและมีประสิทธิภาพมากขึ้น
Tamiya Color Spray Paints
These cans of spray paint are extremely useful for painting large surfaces. The paint is synthetic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover two or three 1/24 scale sized car bodies. Tamiya spray paints are not affected by acrylic or enamel paints; therefore, following an overall base coat, details can be added or picked out using enamel and/or acrylic paints. By combining the use of these three types of paints, the finishing of plastic models becomes simpler and more effective.
TS-paints are for hard plastic :
These bodies are strong, often up to 3mm thick and are made usually from strong ABS plastic. This type of body is common on Scale realistic crawlers and in many older style Tamiya Nostalgia Kits. Hard Plastic bodies usually need some preparing work before the paint such as sanding or attaching some body parts. It is very highly recommended to use fine primer paint before the final spray! Pro-tip! Use high grade masking tape. Cheap brands may let your paint bleed through!
Tips for painting with spray paints:
Never paint in hurry! You are going to watch this paintwork many years so reserve time. Total process of fine paintwork is usually few days or more from start to finish! Take your time.
Never paint in too humid air, rain or too cold. Any of these will easily ruin your paintwork.
Wash the body with mild soap and let it dry overnight.
Make a painting plan. What paint and in what order? No I need to re-mask?
Prepare your body and the painting area. Use masking tape or liquid mask.
Check out everything. Did you mask everything that was supposed to?
You can put the cans in warm water (not hot!) to build up more pressure inside the can. Never exceed +35 Celcius degrees here!
Shake well. Like really well. Then shake some more.
Paint slow but steady and keep the can approx 20cm away from the body. Always start and finish the spray outside of the body. Use paint sparingly.
Let the paint dry few minutes between the layers. There is no hurry! Never try to make it "with one shot". Tamiya paints are fine and thin and if you spray too much before previous layer is dry, there will be runoffs.
If you make a mistake, stop! Do not try to fix wet paint! Let it dry, sand it out and continue again later.