Shopee
ESP32 พร้อมจอในตัว TTGO T-Display ESP32 WiFi Bluetooth module 1.14 inch LCD display development board
5.0
ขายแล้ว 1 ชิ้น
฿679
Rvada ตรวจสอบราคา
สินค้านี้มีประวัติขายน้อย (1 ชิ้น) โปรดพิจารณาข้อมูลร้านค้าประกอบ
ราคานี้อยู่ที่ประมาณ 82% ของราคาเฉลี่ยสินค้าหมวดเดียวกัน (เทียบจากฐานข้อมูลกว่า 1.5 ล้านรายการ)
ModuleMore
แบรนด์:
NoBrand
ซื้อที่ Shopee
คุณจะถูกนำไปยัง Shopee
ลิงก์นี้เป็นลิงก์พันธมิตร เราอาจได้รับค่าคอมมิชชั่นจากการสั่งซื้อ โดยราคาที่คุณจ่ายไม่เปลี่ยนแปลง
รายละเอียดสินค้า
วิธีการตั้งค่าเพื่อใช้จอร่วมกับ TFT_eSPI library
Hardware Specifications:
- Chipset: ESPRESSIF-ESP32 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor
- FLASH Memory: QSPI flash 4MB
- SRAM: 520 KB SRAM
- Button: Reset
- USB to TTL IC: CP2104
- Modular interface: UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, ADC, capacitor touch sensor, DACLNA pre-amplifier
- Display: IPS ST7789V 1.14 Inch
- Working Voltage: 2.7V-4.2V
- Working Current: About 60MA
- Sleep Current: about 120uA
- Working temperature range: -40℃ ~ +85℃
- SizeWeight: 51.52 x 25.04 x 8.54mm(7.81g)
Power Supply Specifications:
- Power Supply: USB 5V/1A
- Charging current: 500mA
- Battery: 3.7V lithium battery (Not included)
- JST Connector: 2Pin 1.25mm
- USB: Type-C
Wi-Fi:
- Standard: FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC
- Protocol: 802.11 b/g/n(802.11n，speed up to150Mbps)A-MPDU and A-MSDU polymerization，support 0.4S Protection interval
- Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M)
- Transmit Power: 22dBm
- Communication distance: 300m
Bluetooth:
- Protocol: Meet Bluetooth v4.2BR/EDR and BLE standard
- Radio frequency: With -97dBm sensitivity NZIF receiver Class-1,Class-2Class-3 emitter AFH
- Audio frequency: CVSDSBC audio frequency
Software specification:
- Wi-Fi Mode: Station/SoftAP/SoftAP+Station/P2P
- Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS
- Encryption Type: AES/RSA/ECC/SHA
- Firmware upgrade: UART download/OTA（Through network/host to download and write firmware）
- Software Development: Support cloud server development /SDK for user firmware development
- Networking protocol: IPv4、IPv6、SSL、TCP/UDP/HTTP/FTP/MQTT
- User Configuration: AT + Instruction set, cloud server, android/iOSapp
- OS: FreeRTOS
Pinout Diagram:
Resources:
- Technical info
- Quick Start Guide
- Arduino Example Code
- Schematic
- Pin Map
Hardware Specifications:
- Chipset: ESPRESSIF-ESP32 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor
- FLASH Memory: QSPI flash 4MB
- SRAM: 520 KB SRAM
- Button: Reset
- USB to TTL IC: CP2104
- Modular interface: UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, ADC, capacitor touch sensor, DACLNA pre-amplifier
- Display: IPS ST7789V 1.14 Inch
- Working Voltage: 2.7V-4.2V
- Working Current: About 60MA
- Sleep Current: about 120uA
- Working temperature range: -40℃ ~ +85℃
- SizeWeight: 51.52 x 25.04 x 8.54mm(7.81g)
Power Supply Specifications:
- Power Supply: USB 5V/1A
- Charging current: 500mA
- Battery: 3.7V lithium battery (Not included)
- JST Connector: 2Pin 1.25mm
- USB: Type-C
Wi-Fi:
- Standard: FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC
- Protocol: 802.11 b/g/n(802.11n，speed up to150Mbps)A-MPDU and A-MSDU polymerization，support 0.4S Protection interval
- Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M)
- Transmit Power: 22dBm
- Communication distance: 300m
Bluetooth:
- Protocol: Meet Bluetooth v4.2BR/EDR and BLE standard
- Radio frequency: With -97dBm sensitivity NZIF receiver Class-1,Class-2Class-3 emitter AFH
- Audio frequency: CVSDSBC audio frequency
Software specification:
- Wi-Fi Mode: Station/SoftAP/SoftAP+Station/P2P
- Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS
- Encryption Type: AES/RSA/ECC/SHA
- Firmware upgrade: UART download/OTA（Through network/host to download and write firmware）
- Software Development: Support cloud server development /SDK for user firmware development
- Networking protocol: IPv4、IPv6、SSL、TCP/UDP/HTTP/FTP/MQTT
- User Configuration: AT + Instruction set, cloud server, android/iOSapp
- OS: FreeRTOS
Pinout Diagram:
Resources:
- Technical info
- Quick Start Guide
- Arduino Example Code
- Schematic
- Pin Map