Shopee
LEADING OCEAN 200g. Phosphate Remover เม็ดดูดซับสารฟอสเฟส PO4 ใช้งานง่าย ลดได้รวดเร็ว ลดของเสีย ตะไคร่น้ำ ตู้ปลา coral
5.0
ขายแล้ว 1 ชิ้น
0 ครั้ง
฿299
ALL ABOUT PETBUDDY
แบรนด์:
NoBrand
ซื้อที่ Shopee
คุณจะถูกนำไปยัง Shopee
รายละเอียดสินค้า
LEADING OCEAN 200g. Phosphate Remover เม็ดดูดซับสารฟอสเฟส PO4 ใช้งานง่าย ลดได้รวดเร็ว ลดของเสีย ตะไคร่น้ำ ตู้ปลา ทะเล coral
ALUMINUM BASED PHOSPHATE ADSORBENT
LEADING OCEAN 200g.Phosphate Remover เทคโนโลยีใหม่ล่าสุด2025 ที่ผลิตมาแก้ไขปัญหาสำหรับคนที่ใช้โรว่าฟอสแล้วเจอผงหลุดลงตู้ ใส่แล้วน้ำเหลือง ปัญหาเหล่านี้จะหมดไป ทำมาแบบเม็ดใหญ่และเครือบนาโนโค้ดเพื่อที่ไม่ทำให้ตัวผงละลายแบบโรว่า สามารถดูดPO4ได้ดีกว่าเดิม อัดแน่น อายุการใช้งานที่ยาวนานกว่าเดิม จากเดิม 1-2เดือนเปลี่ยน สามารถใช้งานได้ถึง 3-4เดือนเปลี่ยนครั้ง สะอาด ปลอดภัย ไม่เป็นอันตรายต่อสิ่งมีชีวิตทุกชนิด ปลอดภัยต่อปลาและปะการัง
เม็ดดูดซับสารฟอสเฟส ช่วยลดของเสีย ตะไคร่น้ำ ใช้ได้ทั้งตู้น้ำจืดและน้ำทะเล
ช่วยทำให้น้ำใส ลดสารอินทรีย์ ช่วยลดฟอสเฟส ลดการเกิดตะไคร่
วิธีใช้
1. ให้นำเม็ดดูดซับสารฟอสเฟส ทิ้งไว้จนกว่าจะจมน้ำทั้งหมด ล้าง 2-3รอบก่อนใส่ถุงซิปลงตู้
2.ใส่ในถุงตาข่าย/ถุงมีเดีย หรือ ในกระบอก Reactor เพื่อใช้งาน วางในจุดที่น้ำไหลผ่านเยอะๆ
3.อัตราส่วนการใช้ 50g. ต่อน้ำ 100ลิตร
ข้อแนะนำ
* ถ้าใส่ในถุงตาข่าย ให้วางไว้ในตู้บนที่มีกระแสน้ำไหลผ่านได้ดี หรือถ้ากรองล่างให้ไว้หลังสกิมเมอร์
ไม่จำเป็นต้องใส่กับกระบอกรีมูฟฟก็ได้ ขอแค่วางไหนจุดที่โดนน้ำไหลผ่าน ตัวเม็ดจะได้ดูดPO4 อย่า
เต็มที่
-Rapidly removes phosphate and silicate
-Good for fresh or saltwater aquariums
LEADING OCEAN Phosphate Remover is great for refills programs and shop use. This phosphate remover will perform better than competing products and is economical to use. It is reef safe and good for freshwater or saltwater applications. The tremendous bead design has superior flow characteristics. It does not release phosphate or silicate back into the water.
Directions: Use 100g cup per 200L. Place product in a filter bag and rinse with cold tap water. Product will generate heat when wet the first time. Place for maximum flow through media. Leave product in system for 7 days and test phosphate.
If phosphate still is above .02 mg/l, replace media. After phosphate is at desired levels, change media monthly as needed or when phosphate rises.
LEADING OCEAN Phosphate Remover is best used in smaller quantities with frequent changes. In an environment with an excessively high phosphate reading, it may exhaust rapidly in 6-10 days. Place the product in a high flow rate area and test your phosphate levels. Change as needed. When aquarium levels are below 0.2 ppm (mg/L), leave that portion of it in the filter. MARINE SOURCES Phosphate Remover may yellow somewhat as it picks up organics, but that is not an indicator of exhaustion of phosphate removal. Continue to test weekly for phosphate until you see it begin to rise again. You will then know that it is time to be changed. MARINE SOURCES Phosphate Remover will absorb the silicate, as well. LEADING OCEAN Phosphate Remover is inert and safe to leave in the filter.
Each liter of LEADING OCEAN Phosphate Remover can remove up to 40,000 mg. of phosphate or about 100 mg/L of phosphate in 100 gallons.
ONE: The hazards of phosphates to fish tanks mainly manifest in the following aspects:
1. Promote algae growth: Phosphates are important nutrients for algae growth. Excessive phosphate can lead to overgrowth of algae, which not only affects the appearance of fish tanks, but also hinders light penetration and affects the photosynthesis of aquatic plants.
2. Oxygen consumption: Large amounts of algae consume oxygen in the water during nighttime respiration, leading to a decrease in dissolved oxygen in the fish tank and posing a threat to the survival of fish and other organisms.
3. Deterioration of water quality: The death and decomposition of algae can deteriorate water quality, producing harmful substances such as ammonia nitrogen and nitrite, which affect the health of fish.
4. Impact on biological balance: Excessive phosphate may disrupt the balance of the ecosystem in fish tanks, affecting the growth and activity of beneficial microorganisms, and thus affecting important ecological processes such as nitrogen cycling.
In summary, controlling the content of phosphate in fish tanks is crucial for maintaining good water quality and ecological balance of aquarium.
TWO: Usage method
I. Preparation work
Firstly, turn off the filter and water pump of the fish tank to avoid interference from water flow during operation.
II. Place PHOSMINUS
1. Open the packaging of PHOSMINUS and rinse them several times with clean water.
Spread the PHOSMINUS evenly in the filter layer at the bottom of the fish tank. Alternatively, it can be packed in filter bags and placed in the water pump compartment or the compartment near the water pump.
3. It is recommended to place PHOSMINUS appropriately according to the size and water quality of the aquarium. Generally speaking, the usage ratio is about 100 grams of phosphate absorbing beads per 100 liters of water.
4 LEADING OCEAN PHOSMINUS aluminum based phosphate adsorbent has extremely strong adsorption capacity and will continue to absorb; In general, adding 50g of this product to 100L of water can reduce 0.5PPM.
ALUMINUM BASED PHOSPHATE ADSORBENT
LEADING OCEAN 200g.Phosphate Remover เทคโนโลยีใหม่ล่าสุด2025 ที่ผลิตมาแก้ไขปัญหาสำหรับคนที่ใช้โรว่าฟอสแล้วเจอผงหลุดลงตู้ ใส่แล้วน้ำเหลือง ปัญหาเหล่านี้จะหมดไป ทำมาแบบเม็ดใหญ่และเครือบนาโนโค้ดเพื่อที่ไม่ทำให้ตัวผงละลายแบบโรว่า สามารถดูดPO4ได้ดีกว่าเดิม อัดแน่น อายุการใช้งานที่ยาวนานกว่าเดิม จากเดิม 1-2เดือนเปลี่ยน สามารถใช้งานได้ถึง 3-4เดือนเปลี่ยนครั้ง สะอาด ปลอดภัย ไม่เป็นอันตรายต่อสิ่งมีชีวิตทุกชนิด ปลอดภัยต่อปลาและปะการัง
เม็ดดูดซับสารฟอสเฟส ช่วยลดของเสีย ตะไคร่น้ำ ใช้ได้ทั้งตู้น้ำจืดและน้ำทะเล
ช่วยทำให้น้ำใส ลดสารอินทรีย์ ช่วยลดฟอสเฟส ลดการเกิดตะไคร่
วิธีใช้
1. ให้นำเม็ดดูดซับสารฟอสเฟส ทิ้งไว้จนกว่าจะจมน้ำทั้งหมด ล้าง 2-3รอบก่อนใส่ถุงซิปลงตู้
2.ใส่ในถุงตาข่าย/ถุงมีเดีย หรือ ในกระบอก Reactor เพื่อใช้งาน วางในจุดที่น้ำไหลผ่านเยอะๆ
3.อัตราส่วนการใช้ 50g. ต่อน้ำ 100ลิตร
ข้อแนะนำ
* ถ้าใส่ในถุงตาข่าย ให้วางไว้ในตู้บนที่มีกระแสน้ำไหลผ่านได้ดี หรือถ้ากรองล่างให้ไว้หลังสกิมเมอร์
ไม่จำเป็นต้องใส่กับกระบอกรีมูฟฟก็ได้ ขอแค่วางไหนจุดที่โดนน้ำไหลผ่าน ตัวเม็ดจะได้ดูดPO4 อย่า
เต็มที่
-Rapidly removes phosphate and silicate
-Good for fresh or saltwater aquariums
LEADING OCEAN Phosphate Remover is great for refills programs and shop use. This phosphate remover will perform better than competing products and is economical to use. It is reef safe and good for freshwater or saltwater applications. The tremendous bead design has superior flow characteristics. It does not release phosphate or silicate back into the water.
Directions: Use 100g cup per 200L. Place product in a filter bag and rinse with cold tap water. Product will generate heat when wet the first time. Place for maximum flow through media. Leave product in system for 7 days and test phosphate.
If phosphate still is above .02 mg/l, replace media. After phosphate is at desired levels, change media monthly as needed or when phosphate rises.
LEADING OCEAN Phosphate Remover is best used in smaller quantities with frequent changes. In an environment with an excessively high phosphate reading, it may exhaust rapidly in 6-10 days. Place the product in a high flow rate area and test your phosphate levels. Change as needed. When aquarium levels are below 0.2 ppm (mg/L), leave that portion of it in the filter. MARINE SOURCES Phosphate Remover may yellow somewhat as it picks up organics, but that is not an indicator of exhaustion of phosphate removal. Continue to test weekly for phosphate until you see it begin to rise again. You will then know that it is time to be changed. MARINE SOURCES Phosphate Remover will absorb the silicate, as well. LEADING OCEAN Phosphate Remover is inert and safe to leave in the filter.
Each liter of LEADING OCEAN Phosphate Remover can remove up to 40,000 mg. of phosphate or about 100 mg/L of phosphate in 100 gallons.
ONE: The hazards of phosphates to fish tanks mainly manifest in the following aspects:
1. Promote algae growth: Phosphates are important nutrients for algae growth. Excessive phosphate can lead to overgrowth of algae, which not only affects the appearance of fish tanks, but also hinders light penetration and affects the photosynthesis of aquatic plants.
2. Oxygen consumption: Large amounts of algae consume oxygen in the water during nighttime respiration, leading to a decrease in dissolved oxygen in the fish tank and posing a threat to the survival of fish and other organisms.
3. Deterioration of water quality: The death and decomposition of algae can deteriorate water quality, producing harmful substances such as ammonia nitrogen and nitrite, which affect the health of fish.
4. Impact on biological balance: Excessive phosphate may disrupt the balance of the ecosystem in fish tanks, affecting the growth and activity of beneficial microorganisms, and thus affecting important ecological processes such as nitrogen cycling.
In summary, controlling the content of phosphate in fish tanks is crucial for maintaining good water quality and ecological balance of aquarium.
TWO: Usage method
I. Preparation work
Firstly, turn off the filter and water pump of the fish tank to avoid interference from water flow during operation.
II. Place PHOSMINUS
1. Open the packaging of PHOSMINUS and rinse them several times with clean water.
Spread the PHOSMINUS evenly in the filter layer at the bottom of the fish tank. Alternatively, it can be packed in filter bags and placed in the water pump compartment or the compartment near the water pump.
3. It is recommended to place PHOSMINUS appropriately according to the size and water quality of the aquarium. Generally speaking, the usage ratio is about 100 grams of phosphate absorbing beads per 100 liters of water.
4 LEADING OCEAN PHOSMINUS aluminum based phosphate adsorbent has extremely strong adsorption capacity and will continue to absorb; In general, adding 50g of this product to 100L of water can reduce 0.5PPM.